讲师

申芳华

发布单位: 更新时间:2023/12/18 16:55:48 访问量:
 

申芳华(Fanghua Shen),工学博士,东莞理工学院,机械工程学院,先进成型制造系,材料成型及控制工程专业,副研究员,硕士研究生导师,本科班主任,国际SCI期刊审稿人,东莞市特色人才。 The theory founder of the orientation streamline approach and the novel texture evaluation index (FCGB, XCGB, and CTTS).

1、主要研究方向:

高性能航空铝合金(Al-Cu-Mg/Al-Cu-Mg-Li)强韧化、疲劳损伤行为、织构前沿基础问题研究, 散热铝合金应用基础问题研究;

2、教育经历:

2018.9-2018/12, 英国卢瑟福国家实验室ISIS散裂中子源,访问学者(广东省教育厅:高校优秀青年科研人才国际培养计划);

2012/9-2016/12,中南大学,材料学,博士,导师:易丹青教授;

2009/9-2012/6, 昆明理工大学,材料加工工程,硕士,导师:金青林教授;

2005/9-2009/6,湖南工程学院,材料成型及控制工程,学士,导师:吴安如教授;

3、主要科研经历:

(1)国家自然科学基金青年项目,51701039,织构转换率XCGBAl-Cu-Mg 航空铝合金再结晶程度及疲劳性能的定量化评价,2018/1-2020/12, 20万,主持,结题;

(2)国家科技部973项目子课题,2012CB619506-02,中强铝合金板材形变组织与耐损伤性能的均匀化调控,2012/1-2016/12, 200万,主要完成人,结题, 优秀

(3)国家自然科学基金面上项目,51474244,60万,预合金粉末内氧化过程中金属/氧化物界面的原位形成和结构演变研究,2014/1-2018/12, 参加, 结题;

(4)国家自然科学基金-云南省人民政府联合基金重点项目子课题, u0837603, 多孔铜基材料结构控制及其力学和热学性能基础研究, 2009/1-2012/1256万,参加, 结题.

(5)东莞市社会科技发展项目,原位纳米增强海洋装备用钢强韧性能调控技术,201850710216022018/7-2020/6, 30万,参加,在研.

(6)广东省科技创新平台,粤港中子散射科学技术联合实验室,2019B121205003 2020.01.01-2022.12.31500万,参加,结题;

(7)广东省科技厅重点项目,靠精密摆线行星减速器系列产品研发与产业化,2020B090926002,2020.07.03-2022.12.31, 88万,参加,在研;

(8)市厅级高等学校“创新强校工程”创新项目,多孔镁基磷灰石骨组织生物医学工程材料的制备及关键技术研究,2017KTSCX177 ,2018.01.01-2019.12.31,20万,参加, 结题;

(9)校级项目,东莞理工学院横沥模具专业镇产学研结合示范示范基地,2018.01.01-2020.12.31200万,参加,进行;

(10)校级项目,机器人高可功能材料形变与相变中子及同步辐射衍射研究团队,TDQN2019005,2019.12.01-2022.11.30,30万,参加,在研;

(11)东莞市科技局,东莞市科技特派员项目,汽车用高强钢构件冲压成形机理及模具结构拓扑优化策略研究,20211800500352,10万,参加,在研;

(12)校级项目,高水平理工科大学建设-优秀青年博士启动,221110057,2018.01-至今,30万,主持,在研

4、主要学术成果:

1. 发表论文 SCI论文二十余篇)

(1)Fanghua Shen*, Zhenzhong Sun, Wenfang Li, Zirong Zhou, Jianwen Guo,Yang Hai, Yuliang Zhao, Yuxun Zhang, Jiaen Luo, Yongsen Deng, Xinhao Zhao, Boyan Sun, Danqing Yi**, New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet,Journal of Alloys and Compounds 967 (2023) 171784,JCR: 1区,被SCI引用次数:1

(2) Fanghua Shen*, Wenfang Li, Zhenzhong Sun, Zirong Zhou, Chunxiao Xie, Zilong Liao, Danqing Yi**, Insights of texture and microstructure evolution in the short time annealing of Al-Cu-Mg alloy at large temperature range, Journal of Alloys and Compounds 871 (2021) 159613,SCI,JCR: 1区,被SCI引用次数:8

(3) Fanghua Shen*, Wenfang Li, Chunxiao Xie, Zirong Zhou, Juming Chen, Danqing Yi, Yuqiang Chen, Bo Jiang, Zhenzhong Sun**, Continuous texture evolution during staged solid solution of Al-Cu-Mg and the influence on fatigue resistance, Fatigue Fract Eng Mater Struct, 44(2021): 651-672,SCI, JCR: 2区,被SCI引用次数:3

(4) Fanghua Shen*, Zhenzhong Sun, Wenfang Li, Zirong Zhou, Shouyan Zhong, Huiyu Huang, Jianwen Guo, Chunxiao Xie, Yanlin Wang, Danqing Yi**,Texture evolution in hot-rolled Al–Cu–Mg sheets using orientation streamline approach and texture index, Journal of Alloys and Compounds, 816 (2020): 152415, IF:3.014, SCI, JCR:1区, 被SCI引用次数:9

(5)Fanghua Shen, Zirong Zhou*, Wenfang Li, Zhenzhong Sun, Jun Tian, Chunxiao Xie, Jianwen Guo, Danqing Yi*, Jiayi Zhang,Haisheng Wang, Bo Jiang, Micro-mechanism of texture evolution during isochronal annealing of as-annealed hot rolled Al-Cu-Mg sheet,Material & Design, 165(2019): 107575, IF:5.573, JCR:1区,被SCI引用次数:16

(6) Fanghua Shen, Danqing Yi*, Yong Jiang*, Bin Wang, Huiqun Liu, Cong Tang, Wenbin Shou,Semi-quantitative evaluation of texture components and fatigue properties in 2524 T3 aluminum alloy sheet, Materials Science and Engineering A, 2016, 657:15-25,SCI,IF:2.647, JCR:1区,被SCI引用次数:45

(7) Fanghua Shen, Danqing Yi*, Bin Wang*, Huiqun Liu, Yong Jiang, Cong Tang, Bo Jiang, Semi-quantitative evaluation of texture and anisotropy of the yield strength in 2524 T3 alloy sheet,Materials Science and Engineering A,2016,675:386-395,SCI, IF:2.647,JCR:1区,被SCI引用次数:30

(8) Fanghua Shen, Bin Wang, Huiqun Liu, Yong Jiang, Cong Tang,Wenbin Shou, Suping Pan, Yuqiang Chen, Danqing Yi*,Effects of secondary particle-induced recrystallization on fatigue crack growth in AA2524/Al-Cu-Mg T3 alloy sheets, Journal of Alloys and Compounds, 2016,685:571-580, SCI, IF:3.014, SCI, JCR:1区,被SCI引用次数:22

(9) Fanghua Shen, Bin Wang* ,Danqing Yi*,Huiqun Liu,Cong Tang, Wenbin Shou,Effects of heating rate during solid-solution treatment on microstructure and fatigue properties of AA2524 T3 Al−Cu−Mg sheet, Material & Design,2016,104: 116-125, SCI, IF: 3.997 JCR:1区,被SCI引用次数:23

(10) 申芳华、李再久、杨天武、金青林*、蒋业华、周荣,规则多孔铜基新型自润滑材料的干摩擦性能,摩擦学学报,2012.32:150-156, EI, IF: 1.03,被引用次数:15

(11)Deyan Yin, Huiqun Liu*, Yuqiang Chen*, Danqing Yi, Bo Wang, Bin Wang, Fanghua Shen, Shang Fu, Cong Tang, Suping Pan, Effect of grain size on fatigue-crack growth in 2524 aluminium alloy, International Journal of fatigue,2016,84:9-16. SCI, IF: 2.28,JCR:1区,SCI引用次数:95

(12)Wenbin Shou, Danqin Yi, Huiqun Liu, Cong Tang, Fanghua Shen, B wang*,Effect of grain size on the fatigue crack growth behavior of 2524-T3 aluminum alloy, Archives of Civil and Mechanical Engineering, 2016, 16(3):304-312,SCI, IF:1.79, JCR: 2区,SCI引用次数:6

(13)Jiayi Zhang, Mingyang Ma, Fanghua Shen, Danqing Yi, Bin Wang*, Influence of deformation and annealing on electrical conductivity, mechanical properties and texture of Al-Mg-Si alloy cables, Materials Science and Engineering A, 2018,710:27-37, SCI,IF:2.647JCR1, SCI引用次数:51

(14)Bo Jiang, Fuhua Cao, Haisheng Wang, Danqing Yi*, Yong Jiang, Fanghua Shen, Bin Wang, Huiqun Liu, Effect of aging time on the microstructure evolution and mechanical property in an Al-Cu-Li alloy sheet, Materials Science and Engineering: A,2019,740-741, 157-164, SCI, IF: 2.647,JCR:1区,SCI引用次数:23(15)Chunxiao Xie, Wen Li, Fanghua Shen, Yu Liu, Li Xie, Zilong Liao, ShouYan Zhong, Plastic deformation behavior of a novel Fe-based metallic glass under different mechanical testing techniques, Journal of Non-Crystalline Solids,2018,499(1):58-61,SCI,JCR:2区

(16)Chunxiao Xie, WenLi, Donghai Zheng, Kewei Wang, Yuanzheng Yang, Fanghua Shen, Li Xie, Zilong Liao, ShouYan Zhong, Study of crystallization behavior and kinetics of magnetic FeCoCrNiZr high entropy amorphous alloy, Journal of Non-Crystalline Solids 514 (2019) 20–24,JCR: 2区

(17) Mingyang Ma, Bing Wang*, Huiqun Liu, Danqing Yi, Fanghua Shen, Tongguang Zhai, Investigation of fatigue crack propagation behavior of 5083 aluminum alloy under various stress ratios: Role of grain boundary and Schmid factor, Materials Science and Engineering: A, 773 (2020): 138871, SCI, JCR: 1区;

(18)Bojiang, Haisheng Wang, Danqing Yi*, Yu Tian, Fanghua Shen, Bin Wang, Huiqun Liu*, Zhan Hu, Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy, Materials Characterization,162(2020): 110184,SCI, JCR: 1区;

(19) Y.Q. Chen*, Z.H. Tang, S.P. Pan, W.H. Liu, Y.F. Song, Y. Liu, B.W. Zhu, W. Zhou, F. H. Shen, A new type of anti-phase boundaries in the T(Al20Cu2Mn3) phase and the pre-deformation effect on T phase precipitation, Intermetallics,127 (2020): 106977., JCR: 2区;

(20) ZHOU Zirong*, WANG Yanlin, WEI Gang, ZHANG Weiqiang, ZHONG Shouyan, PENG Yun, SHEN Fanghua, Influence of Deformation Process on Microstructure and Impact Properties of 50CrVA High Strength Steel, Hot Working Technology, 48(2019): 28-31, EI

(21) Haisheng Wang, Bo Jiang, Danqing Yi*, Bin Wang, Huiqun Liu, Chunping Wu, Fanghua Shen, Microstructure, corrosion behavior and mechanical properties of a non-isothermal ageing treated cast Al–4.5Cu–3.5Zn–0.5Mg alloy, Mater. Res. Express,7(2020): 016547, SCI

(22) Yuliang Zhao*, Weiwen Zhang*, DongfuSong, Bo Lin, Fanghua Shen, Donghai Zheng, ChunXiao Xie, Zhenzhong Sun, Yanan Fu, RunxiaLi*, Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy, Journal of Materials Science & Technology, 80 (2021): 84-99, SCI, JCR: 1区.

(23)Yuliang Zhao*, Weixiang He, Dongfu Song*, Fanghua Shen, Xinxin Li, Zhenzhong Sun, Yao Wange, Shuhong Liu, Yong Du, Ricardo Fernandez, Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys,Ultrasonics Sonochemistry, 89 (2022): 106139,SCI, JCR 1区

(24)Yuliang Zhao, Weixiang He, Dongfu Song, Weiwen Zhang, Fanghua Shen, Baisheng Ma, Yiwang Jia, Zhenzhong Sun, Yanan Fu, Ricardo Fernández,In-situ synchrotron X-ray radiography study of primary Fe-rich phases growth in Al-Fe(single bondCu) alloys,Materials Characterization, 195(2023): 112539,SCI, JCR 1区

2. 部分发明专利(申请及授权专利二十余项)

1申芳华, 李文芳,周梓荣,田君,孙振忠,钟守炎,谢春晓,邓君,廖梓龙、李伟红、邓旭霞,一种航空蒙皮用Al-Cu-Mg T3铝合金加工过程质量监控方法,2019.6.11, 中国,CN201810369530.1,发明专利,已授权(CN108486510 B

2申芳华,周梓荣,李文芳,孙振忠,钟守炎,田君、陈举铭、黄辉宇、谢春晓,郭建文,邓君,王康,王艳林,祝闻,一种耐疲劳损伤航空蒙皮用Al-Cu-Mg T3铝合金热处理方法,中国,CN201711321271.7,已公开( CN108018508A

3)金青林、申芳华、蒋业华、周荣、岑启宏,一种固体自润滑材料及其制备方法,2014.11.05,中国,CN102492867B,已授权

4)谢春晓,郑东海,申芳华,李胜,杨宇辉,一种全金属组元钴基金属玻璃及其制备方法,中国,CN201710224186.2 2017.08.04,已公开(CN107012410A

5)谢春晓,申芳华,李文,一种金属轴套铸造成型后中子位置检测机,中国,CN201810358390.8 ,2018.11.23已授权(CN208140062U

(6申芳华,林朝阳,一种具有快速冷却功能的泡沫铝加工设备,2019.8.30,中国,实用新型专利,已经授权,CN209322987

(7申芳华,林朝阳,一种用于泡沫铝加工的熔炼炉,2019.8.13,中国,实用新型专利,已经授权,CN209243136U

(8申芳华,林朝阳,一种金属材质自动化加工用智能导向加料装置,2019.7.19,中国,实用新型,已授权,CN 209127532 U.

(9申芳华,林朝阳,一种碲化锌的制备方法,2020.12.04,中国,发明专利,已授权,CN109081317B.

(10申芳华,谢春晓,杨宇辉,赵愈亮,陶诚,何风华,徐光周,一种新型汽车变速器壳体压铸铝合金及其制备工艺,2021.11.19,中国,发明专利,已授权,CN 110453115 B

(11)周梓荣; 邓君; 王艳林; 孙振忠; 贺聪; 谢春晓; 廖梓龙; 李伟红; 申芳华,一种用于钢板成型的流动形淬火装置,2020.07.24,中国,实用新型,已授权,CN211079247U

(12)周梓荣; 邓君; 王艳林; 孙振忠; 谢春晓; 廖梓龙; 李伟红; 申芳华; 张玉勋,一种用于钢板热成型的淬火装置,中国,实用新型,2020.07.24CN211079242U

5、承担课程:

主要承担《材料科学基础》、《晶体材料织构分析》、《材料成型原理》、《材料性能学》、《材料与文明》、《机械工程测试技术》、《工程制图》、《专业英语》、《质量管理与控制》等课程。

6、个人荣誉:

1中南大学西北有色院一等奖学金、中南大学“2011计划国家协同创新中心博士骨干;

220219月获得国际先进材料协会”IAAM奖项提名邀请。

3:  20236月获得东莞市特色人才(第四类)

4:优秀班主任

7、产学研合作:

立讯技术、深圳泰瑞琪、中泰模具